change Sector Ubiquity Equipment (power beam 400 or lite beam)

Equipment specific

  Ubiquity :

(power beam 400    or   lite beam)

1. From the browser, enter

   https://192.168.10.1

2. Enter

  user: admin

  pass: Gig@Cli3nt

3- Log in

  Wireless

At the top of the list

4- Choose

select

In front of SSID

5- Click on

(Signal/noise_dbm) so that a table is arranged.

5- Choose a vector whose sign should be between -20 and 59- and should not be higher than -60.

6-Giga equipment starts with

Gigaxxxx

7-After you determine the

sector

Click on

select

then

change

Then

apply

• Related Articles

• Change Sector cambium equipment.

  Specific to the cambium equipment 1. Enter the menu a screen 2.Click on Menu Wireless 3. Choose a silence as its beginning gigaxxx Make sure the signal is... RSSI(dBm) is less than -60 4.Click Add 5.Save the changes to the save tab above

• settings file for the Cambium equipment

  Steps to download the settings file for the Cambium equipment. 1. Enter the list Tools 2.Click on Menu Backup/restore 3.From the list Restore Configuration 4. Choose enabled 5. Choose browse 6.Download the file and then upload

• Change Wi-Fi password

  Connect the router directly to the laptop and open a browser. internet explorer Or any other browser. Enter 192.168.1.1 or 192.168.0.1 (depending on the router) Enter username = admin / password. Choose from the menu on the left (wireless) It will ...

• تغيير سكتور لمعدات باور بيم و لايت بيم

  1 . من المتصفح ادخل على https://192.168.10.1 2 . ادخل user : admin pass: Gig@Cli3nt 3- الدخول على Wireless ف اعلى القائمه 4- اختار select امام SSID 5- اضغط على (Signal/noise_dbm) ليتم ترتيب الجدول 5- اختار سكتور تكون اشارته ما بين -20الى 59- ويجب ان ...

• Steps to connect cables

  Please check the operation of the antenna by ensuring that the cables are connected correctly. Follow the steps The cable from the antenna is installed in the power adapter at the entrance (poe) ................. The short cable between the power ...