Steps to access the signal Settings.

Steps to access the signal Settings.





I couldn't reach your equipment.


Don't worry we can help you..


By connecting the router directly to the laptop and opening a browser

internet explorer
Or any other browser


Or via phone, provided it is connected to Giga Wi-Fi without the need for internet access.




1. From the browser, enter

2. Enter
  user: admin
  pass: Gig@Cli3nt
or
username: readonly
password: R3ad_0nly

3. Take a photo of the sign and send it to us

    • Related Articles

    • settings file for the Cambium equipment

      Steps to download the settings file for the Cambium equipment. 1. Enter the list Tools 2.Click on Menu Backup/restore 3.From the list Restore Configuration 4. Choose enabled 5. Choose browse 6.Download the file and then upload

    • Steps to connect cables

      Please check the operation of the antenna by ensuring that the cables are connected correctly. Follow the steps The cable from the antenna is installed in the power adapter at the entrance (poe) ................. The short cable between the power ...

    • Change Wi-Fi password

      Connect the router directly to the laptop and open a browser. internet explorer Or any other browser. Enter 192.168.1.1 or 192.168.0.1 (depending on the router) Enter username = admin / password. Choose from the menu on the left (wireless) It will ...

    • Change Sector cambium equipment.

      Specific to the cambium equipment 1. Enter the menu a screen 2.Click on Menu Wireless 3. Choose a silence as its beginning gigaxxx Make sure the signal is... RSSI(dBm) is less than -60 4.Click Add 5.Save the changes to the save tab above

    • change Sector Ubiquity Equipment (power beam 400 or lite beam)

      Equipment specific Ubiquity : (power beam 400 or lite beam) 1. From the browser, enter https://192.168.10.1 2. Enter user: admin pass: Gig@Cli3nt 3- Log in Wireless At the top of the list 4- Choose select In front of SSID 5- Click on ...